|
Home » Dreambox DVB

Hot Fresh Dreambox receiver fixes today! Dreambox is the most advanced free to air fta satellite receiver out. The dreambox is powered by a Linux open source OS that allows you to do lots of things you can not on coolsat pansat viewsat receivers. Our Dreambox will bring you enter a world where your dreams. We supply Dreambox receivers with very cheap price, every one can shopping online on this site, we ship all of our products to all over the world.
|
 |

DreamBox DM500S
The Dreambox 500S is a 250 MHz IBM PowerPC Processor (350 Mips) with a Linux Operating System. Dreambox 500 has 1 smartcard-reader and features a 100Mbit full duplex Ethernet port for hooking up internet access to your Dreambox 500. Dreambox 500S supports extended EPG or electronic program guide that displays the shows channels and times they are playing at. Dreambox 500 also supports multiple LNB-Switching control and supports all diseqc siwtches. A great sharp tuner with good SPDI/F Interface for digital bit stream out (AC-3 / DTS) sound on dreambox 500.

Click to enlarge
Original Pice: £150.00
Now: £36.72
|

DreamBox DM500C
The Dreambox 500C is a 250 MHz IBM PowerPC Processor (350 Mips) with a Linux Operating System. Dreambox 500 has 1 smartcard-reader. Dreambox 500C supports extended EPG or electronic program guide that displays the shows channels and times they are playing at. Dreambox 500 also supports multiple LNB-Switching control and supports all diseqc siwtches. A great sharp tuner with good SPDI/F Interface for digital bit stream out (AC-3 / DTS) sound on dreambox 500.

Click to enlarge
Original Pice: £150.00
Now: £36.72
|
 |

DreamBox DM500S OEM
The Dreambox 500S OEM is a 250 MHz IBM PowerPC Processor (350 Mips) with a Linux Operating System. Dreambox 500 OEM has 1 smartcard-reader and features a 100Mbit full duplex Ethernet port for hooking up internet access to your Dreambox 500. Dreambox 500S supports extended EPG or electronic program guide that displays the shows channels and times they are playing at. Dreambox 500 also supports multiple LNB-Switching control and supports all diseqc siwtches. A great sharp tuner with good SPDI/F Interface for digital bit stream out (AC-3 / DTS) sound on dreambox 500.

Click to enlarge
Original Pice: £150.00
Now: £36.72
|

DreamBox DM500C OEM
The Dreambox 500C OEM is a 250 MHz IBM PowerPC Processor (350 Mips) with a Linux Operating System. Dreambox 500 OEM has 1 smartcard-reader. Dreambox 500C supports extended EPG or electronic program guide that displays the shows channels and times they are playing at. Dreambox 500 also supports multiple LNB-Switching control and supports all diseqc siwtches. A great sharp tuner with good SPDI/F Interface for digital bit stream out (AC-3 / DTS) sound on dreambox 500.

Click to enlarge
Original Pice: £150.00
Now: £36.72
|
 |

DreamBox DM800S HD PVR

Click to enlarge
Price: £109.58
|

DreamBox DM800C HD PVR

Click to enlarge
Price: £109.58
|
 |

DreamBox DM800S OEM HD PVR

Click to enlarge
Price: £109.58
|

DreamBox DM800C OEM HD PVR

Click to enlarge
Price: £109.58
|
 |

DreamBox DM8000 HD Satellite Receiver

Click to enlarge
Price: £384.99
|
DreamBox DM500HD with all accessories shopping now!
Receiver with a null modem cable and free FTA software bundle on CD.

£131.54
ON SALE NOW!!!
|
 |

DreamBox DM600S PVR satellite receiver

Click to enlarge
Now: £61.21
|

DreamBox DM600C PVR cable receiver

Click to enlarge
Now: £61.21
|
 |

DreamBox DM7020Si PVR

Click to enlarge
Original Pice: £289.00
Now: £165.99
|

DreamBox DM7025

Click to enlarge
|
 |

Brand new remote control for Dreambox DM7020S/C DM600S/C DM800S/C receiver

Click to enlarge
Original Price: £49.00
Special price: £12.00
|

Brand new remote control for Dreambox DM500S DM500C DM500T

Click to enlarge
Original Price: £49.00
Special price: £10.00
|
 |

Brand new power supply for DM800S DM800C Receiver

Click to enlarge
Original Price: £49.00
Special price: £12.99
|

Brand new power supply for Dreambox DM500C, Dreambox DM500S

Click to enlarge
Original Price: £49.00
Special price: £12.99
|
 |

Ku band 60cm Offset Satellite Dish Antenna

Click to enlarge |
Powerful Satellite Dish for satellite receiver.
- Ku Band 60cm offset Satellite Dish Antenna
- Diameter: 60 x 66cm
- Panel thickness: 0.5/0.6mm
- Specification of Pipe: 38mm(diameter)x500mm(length)
- Two U shape bolts to make the back brackets more stable
- Materials: steel, galvanized, and aluminum(selectable)
- Flat edge realizes more loading quantity
- Unique back bracket design make the dish looks simple and beautiful
- Offset angle: 23.02°
- Focus length: 39cm
- Ku band gain at 12.5GHz: 35.25 ± 1dB
- F/D ratio: 0.62
- Aperture efficiency: >75%
- Available colors: gray or cool gray
- Available mounts: pole, wall, and ground
- Azimuth angle: 0 to 360°
- Humidity: 0 to 100% RH
Price: £25.99
|
 |

Ku band 45cm Offset Satellite Dish Antenna

Click to enlarge |
Powerful Satellite Dish for satellite receiver.
- Ku band 45cm (18 inch x 21 inch) offset TV satellite dish antenna
- Diameter: 45x50cm
- Materials: steel, galvanized steel and aluminum (selectable)
- Good-quality polyester powder coating finish
- Panel thickness: 0.5 and 0.6mm
- Offset angle: 24.12°
- Focus length: 24cm
- Ku band gain at 12.5GHz: 34.25 ±1dB
- F/D ratio: 0.62
- Aperture efficiency: >75%
- Available mounts: pole, wall and ground
- Azimuth angle: 0 to 360°
- Color: gray or cool gray
- Humidity: 0 to 100%RH
Price: £28.66
|
 |

Ku band 55cm Offset Satellite Dish Antenna

Click to enlarge |
Powerful Satellite Dish for satellite receiver.
- Ku band 55cm Offset TV Satellite Dish Antenna
- Size: 55 x 61cm
- "J" shape wall mount together with back brackets zinc-coated for anti-rusting
- Materials: steel, galvanized, and aluminum
- Panel thickness: 0.5/0.6mm
- Offset angle: 24.22°
- Focus length: 33cm
- Ku-band gain at 12.5GHz: 35.25 ± 1dB
- F/D ratio: 0.62
- Aperture efficiency: > 75%
- Available colors: gray or cool gray
- Available mounts: pole, wall, and ground
- Azimuth angle: 0 to 360°
- Humidity: 0 to 100%RH
Price: £26.88
|
 |

C band 1.2m Prime focus Antenna

Click to enlarge |
120cm C Band Satellite Dish for satellite receiver
- Panel(Sector Divided): 1
- Aperture Diameter: 120CM / 4Feet
- C-Band Gain@ 4GHz: 32.67dB
- Ku-Band Gain@ 12.5GHz: 42.32dB
- F/D Ratio: 0.38
- Focus Length: 45.6CM
- Material: Cold Rolling Steel
- Finish: Polyester Powder Coating
- Mounting Type: Ground Mount
- Elevation Alignment: 0~60°/0~90°
- Azimuth Alignment: 0~360°
- Operational Winds
- Able to receive: 25m/sec
- Able to re-set: 40m/sec
- Not broken & fly away: 60m/sec
- Ambient Temperature: -40+60
- Relative Humidity: 0~100%
Price: £39.62
|
 |

C band 1.5m Prime focus Antenna

Click to enlarge |
150cm C Band Satellite Dish for satellite receiver
- Materials: steel, galvanized steel or aluminum (selectable)
- Panel/sector: 6
- Diameter: 150cm (5-feet)
- Panel thickness: 0.5 or 0.6mm
- Available mounts: ground, pole and polar
- Focus length: 68.4cm
- Working frequency: 3.70 to 4.20GHz
- C-band gain @ 4.0GHz: 34.2±1dB
- Ku-band gain @ 12.5GHz: 44.25±1dB
- F/D ratio: 0.38
- Available colors: gray or cool gray
- Packing: individual carton + foam
Price: £57.66
|
 |

C band 1.8m Prime focus Antenna

Click to enlarge |
180cm C Band Satellite Dish for satellite receiver
- C-Band 180cm 6-feet Prime Focus Satellite Dish Antenna with pole mount
- Materials: steel, galvanized steel and aluminum (selectable)
- Panel/sector: 6
- Diameter: 180cm
- Panel thickness: 0.5, 0.6, 0.7 and 0.8mm
- AvaGround, Pole & Polar Mounts available
- Focus length: 68.4cm
- Working frequency: 3.70 to 4.20GHz
- C-band gain at 4.0GHz: 36.35±1dB
- Colors: gray and cool gray
- Packing: individual carton + foam
- Loading quantity:
- 320 sets/20ft FCL
- 800 sets/40ft HQ
Price: £68.32
|
 |

Universal C/Ku Band LNBF in One LNBF

Click to enlarge
|
Universal C/Ku Band LNBF in One LNBF for satellite receiver, you need only one LNBF receive C-Band and KU-Band singal.
- C/Ku LNBF with 22KHz switching
- C-Band
- Input frequency: 3.4~4.2 GHz
- Output frequency: 950~1750 MHz
- LO: 5150 MHz
- Noise: 15°K
- Gain: 65 dB
- Ku-Band
- Input frequency: 11.7~12.2 GHz
- Output frequency: 950~1750 MHz
- LO: 10.750 GHz
- Noise: 0.3 dB
- Gain: 65 dB
Price: £18.88
|
 |

Universal Single Ku Band Satellite LNBF Input Frequency: 10.70 ~ 12.75GHZ

Click to enlarge
Lower Noise Figure. Other LNBFs have a low noise figure of 0.6 dB or higher. This one is only 0.3dB. The lower the number the better and stronger the signal reception. |
Universal Single Ku Band Satellite LNBF for satellite receiver.
- Input frequency. range:
- Low band: 10.70 to 11.70GHz
- High band: 11.70 to 12.75GHz
- L.o. frequency:
- Low band: 9.75GHz
- High band: 10.60GHz
- L.o. stability: ± 1.0MHz @25°C
- Output frequency:
- Low band: 950 to 1950MHz
- High band: 1100 to 2150MHz
- Noise figure: 0.3dB (typ.)
- Conversion gain: 60dB( typ. @25°C)
- Gain flatness: 4.5dB(over band)
- Output connector: 75 O typ. F female
- Cross polar discrimination: 20dB (min.)
- Image rejection: 40dB(min.)
- D.C.Current consumption: 120mA (typ.)
- F/D ratio: 0.6
- Input reflactor type: Offset
- Gain variation: ± 0.5dB/27MHz
- Phase noise:
- -60dBc @ 1KHz Offset
- -85dBc @ 10KHz Offset
- -105dBc @ 100KHz Offset
- Polarization selection:
- Operating temperature: -40 to +70 °C
Price: £7.99
|
 |

Universal Single Ku Band Satellite LNBF Input Frequency: 10.70 ~ 12.75GHZ

Click to enlarge
|
Universal Single Ku Band Satellite LNBF for satellite receiver.
- Input frequency. range:
- Low band: 10.70 to 11.70GHz
- High band: 11.70 to 12.75GHz
- L.o. frequency:
- Low band: 9.75GHz
- High band: 10.60GHz
- L.o. stability: ± 1.0MHz @25°C / ±2.0 MHz (Max.)@-30oC~+70oC
- Output frequency:
- Low band: 950 to 1950MHz
- High band: 1100 to 2150MHz
- Noise figure: 0.6dB (typ.)
- Conversion gain: 60dB( typ. @25°C)
- Gain flatness: ±0.5dB/26MHz
- Output connector: 75 O typ. F female
- Output VSWR: 2.0:1 (Max.)
- Output Power: 0dBm (Min.)(at 1dB gain compression)
- Cross polar discrimination: 25dB (min.)
- Image rejection: 40dB (Min.)
- D.C. Current consumption: 90mA (Typ.)
- Low/High Band Switching
:
High Band:22KHz±4KHz
- Phase noise:
- -50dBc/Hz@1KHz
- -75dBc/Hz@10KHz
- -95dBc/Hz@100KHz
- POL. Switching Voltage:
- 10.5~14.0 V @VP
- 16.0~20.0 V @HP
- Operating temperature: -30 to +70 °C
Price: £6.88
|
 |

Twin Ku Band Satellite LNBF

Click to enlarge
Lower Noise Figure. Other LNBFs have a low noise figure of 0.6 dB or higher. This one is only 0.3dB. The lower the number the better and stronger the signal reception. |
Twin Ku Band Satellite LNBF for satellite receiver.
- Ku-band: Dualpolarization and single output
- Input frequency: 10.7-12.75GHZ
- LO Frequency: 11300MHz
- Image Rejection: 45dB (Min)
- Cross Pol. Discrimination: 20dB(Min)
- Gain Flatness: ±1dB/36MHz
- L.O. Frequency: 9.75/10.6GH 9.75/10.75
- Output Frequency Range: 950-2050/950-2150MHz
- L.O. Stability: ±2.5MHz@-40°C to +60°C
- Return Loss: 8.0dB(2.3:1)
- Polarization Selection:
- V : 12~14.5V DC
- H : 16~18V DC
- D.C. Current Consumption: 120mA(TYP) 150mA(Max)
- F/D Ration: 0.6
- Input Reflector Type: Offset
- Noise Figure: 0.3dB(Typ)
- Conversion Gain: 65dB(TYP)
- Gain Variation: ±1dB/55MHz
- L.O. Phase Noise:
- -70dBc/Hz@10kHz
- -90dBc/Hz@100kHz
- -110dBc/Hz@1MHz
- Output Power: 0dB (Min.)
- Output Connector: 75Ω F type female
- Operating Temperature: -40°C to +60°C
- Polarity swichable through 13/18v
- Direct receiver connection
Price: £16.99
|
 |

Universal Twin Ku LNBF

Click to enlarge
Lower Noise Figure. Other LNBFs have a low noise figure of 0.6 dB or higher. This one is only 0.4dB. The lower the number the better and stronger the signal reception. |
Universal Twin Ku LNBF for satellite receiver.
- Input freq. range:
- Low band: 10.70 to 11.70GHz
- High band: 11.70 to 12.75GHz
- L.o. frequency:
- Low band: 9.75GHz (1MHz @ 25 degree Celsius)
- High band: 10.60GHz (1MHz @ 25 degree Celsius)
- L.o. stability:
- Low band: 2MHz (-40 to +70 degree Celsius)
- High band: 2MHz (-40 to +70 degree Celsius)
- Output freq. range:
- Low band: 950 to 2050MHz
- High band: 1100 to 2150MHz
- Control signals:
- Low band: Ca or Cb (see below)
- High band: Ca and Cc or Cb
- Noise figure: 0.4dB typ.
- Conversion gain: 55dB typ.
- Input VSWR: 2.5:1
- Output VSWR: 2.0:1 (max.)
- Output connector: F-female connector
- Output impedance: 75 ohms typ.
- Cross polar isolation: 20dB (min.)
- Image rejection: 45dB
- Phase noise: -50dBc @ 1KHz -75dBc @ 10KHz -95dBc @ 100KHz
- Supply voltage:
- Ca: 11.5 to 14.0V (vertical polarization)
- 13 VDC typ.Cb: 16.0 to 19.0V (horizontal polarization)
- 18 VDC typ.
- Cc: continuous 22KHz
- Operating temperature: -40 to +70 degree Celsius
- Storage temperature: -40 to +80 degree Celsius
- Relative humidity: 0% to 95%
Price: £17.99
|
 |

Universal Quad Ku LNBF LO Frequency 9.75 ~ 10.60 GHz, Input Frequency 10.70 ~ 12.75 GHz.

Click to enlarge
|
Universal Quad Ku LNBF for satellite receiver.
- Input frequency. range:
- Low band: 10.70 - 11.80GHz
- High band: 11.70 - 12.75GHz
- L.O. frequencyuency:
- Low band: 9.75GHz (1MHz at 25°C)
- High band: 10.60GHz (1MHz at 25°C)
- L.O. stability:
- Low band: 2MHz (-40 - +70°C)
- High band: 2MHz (-40 - +70°C)
- Output frequency. range:
- Low band: 950 - 2,050MHz
- High band: 1,100 - 2,150MHz
- Control signals:
- Low band: Ca or Cb (see below)
- High band: Ca and Cc or Cb
- Noise figure: 0.6dB
- Conversion gain: 55dB
- Input VSWR: 2.5 : 1
- Output VSWR: 2.0:1 (max.)
- Output connector: F-female connector
- Output impedance: 75Ω
- Cross polar isolation: 20dB (min.)
- Image rejection: 45dB
- Phase noise:
- 50dB at 1kHz
- 75dB at 10kHz
- 95dB at 100kHz
- Supply voltage:
- Ca: 11.5 - 14.0V (vertical polarization) 13V DC
- Cb: 16.0 - 19.0V (horizontal polarization) 18V DC
- Cc: continuous 22kHz
- Operating temperature: -40 - +70°C
- Storage temperature: -40 - +80°C
- Relative humidity: 0 - 95%
Price: £17.99
|
 |

Universal Quad Ku LNBF LO Frequency 9.75 ~ 10.60 GHz, Input Frequency 10.70 ~ 12.75 GHz.

Click to enlarge
|
Universal Quad Ku LNBF for satellite receiver.
- Input Frequency
- Low Band: 10.70 GHz -11.70GHz
- High Band: 11.70 GHz -12.75GH
- Output Frequency
- Low Band: 950-1950MHz
- High Band: 1100-2150MHz
- L.O. Frequency
- Low Band: 9.75GHz(1MHz@25)
- High Band: 10.6 GHz(1MHz@25)
- L.O. Stability
- Low Band: ±1MHz(-40 to +70°C)
- High Band: ±1MHz(-40 to +70°C)
- Noise Figure: 0.5 dB
- Conversion Gain: ≥55dB
- Gain Flatness: ≤+/-2dB
- Intput VSWR: 2.5:1(max)
- Output VSWR: 2.0:1(max)
- Output Connector: F-female Connector
- Output Impedance: 75Ω
- Cross Polar Isolation: 20dB(min)
- Supply Voltage
- Ca: 11.5-14.0v(Vertical Polarization) 13VDCType
- Cb: 16.0-19.0v(Horizontal Polarization)18VDCType
- Cc: continues 22KHz
- Direct Current: 150mA
- Control Signals
- Low Band: Ca or Cb(see below)
- High Band: Cc or Cb(see below)
- Operating Temperature: -40to+70
- Storage Temperature: -40to+80
- Relative Humidity: 0%-95%
- Phase Noise
- -50dBc/Hz@1kHz(max)
- -75dBc/Hz@10kHz(max)
- -95dBc/Hz@100kHz(max)
- Image Rejection: 45 dB (min)
Price: £16.68
|
 |

C-Band LNBF for C-Band Satellite Dish

Click to enlarge
|
C-Band LNBF for C-Band Satellite Dish for satellite receiver.
- INPUT FREQUENCY: 3.4~4.2 GHz
- L.O. FREQUENCY: 5.15 GHz ± 1 MHz
- STABILITY: ±2 MHz(-40 ~ +70°C)
- L.O. PHASE NOISE:
- -55 dBc/Hz@1KHz
- -85 dBc/Hz@10KHz
- -105 dBc/Hz@100KHz
- OUTPUT FREQUENCY: 950~1750 MHz
- CONVERSION GAIN: 65 dB (TYP)
- GAIN FLATNESS: ±0.5 dB/36 MHz
- NOISE FIGURE: 15°K
- INPUT V.S.W.R: 2.5:1
- OUTPUT V.S.W.R: 2.5:1
- LOCAL LEAKAGEAT INPUT: -45 dBm
- IMAGE REJECTION: 50 dB
- OUTPUT POWER: + 5 dBm (AT 1 dB COMPRESSION)
- CROSS POLAR ISOLATION: 23dB MIN
- DC SUPPLY VOLTAGE: 11-14.5 V (V),15.5-22 V (H)
- SUPPLY CURRENT: 130 mA (MAX)
- OPERATING TEMPERATURE: -40 ~ +70°C
- RELATIVE HUMIDITY: 0%~95%
- RF INPUT CONNECTER: WAVE GUIDE WC-229
- IF OUTPUT CONNECTER: "F" TYPE FEMALE
- OUTPUT IMPEDANCE: 75 OHMS
Price: £13.8
|
 |

Dual Output Extended C Band LNBF

Click to enlarge
|
Dual Output Extended C Band LNBF for satellite receiver.
- INPUT FREQUENCY: 3.4~4.2 GHz
- L.O. FREQUENCY: 5.15 GHz ± 1 MHz
- STABILITY: ±2 MHz(-40 ~ +70 )
- L.O. PHASE NOISE:
- -55 dBc/Hz@1KHz
- -85 dBc/Hz@10KHz
- -105 dBc/Hz@100KHz
- OUTPUT FREQUENCY: 950~1750 MHz
- CONVERSION GAIN: 65 dB (TYP)
- GAIN FLATNESS: ±0.5 dB/36 MHz
- NOISE FIGURE: 15°K
- INPUT V.S.W.R: 2.5:1
- OUTPUT V.S.W.R: 2.5:1
- LOCAL LEAKAGEAT INPUT: -45 dBm
- IMAGE REJECTION: 50 dB
- OUTPUT POWER: + 5 dBm (AT 1 dB COMPRESSION)
- CROSS POLAR ISOLATION: 23dB? MIN
- DC SUPPLY VOLTAGE: 11-14.5 V (V), 15.5-22 V (H)
- SUPPLY CURRENT: 180 mA (MAX)
- OPERATING TEMPERATURE: -40  ~ +70°C
- RELATIVE HUMIDITY: 0%~95%
- RF INPUT CONNECTER: WAVE GUIDE WC-229
- IF OUTPUT CONNECTER: "F" TYPE FEMALE ×2
- OUTPUT IMPEDANCE: 75 OHMS
Price: £28.13
|
 |

DiSEqC Motor with DiSEqC 1.2, 1.3, Goto X compliant receivers

Click to enlarge
|
DiSEqC Motor for satellite dish.
- Protocol: DiSEqC 1.2
- Compatible receiver: satellite receiver with DiSEqC 1.2 to up
- Antenna size: 120cm max.
- Speed: 1.9°/sec (at 13V); 2.5°/sec (at 18V)
- Azimuth angle: 75° east - 75° west (150° max.) adjustable
- Elevation angle: 10° - 75°
- Tube for antenna: Φ42 x 180 (L)mm/ Φ50 x 180 (L)mm / Φ55 x 180 (L) mm
- Diameter of mounting pole: Φ35 ~ 65mm
- Input voltage: 13 / 18V DC
- Output voltage: 13 / 18V DC (decided by input)
- Power consumption: 50ma (standby) / 350mA (max.)
- Satellite position: 100 positions
- Go to 0 position function: yes (Go to 0°)
- Recalculation function: yes
- Go to X function: yes
- Manual button: two (east / west)
- LED indicator: yes (2 colors)
- Limit protection: adjustable hardware limits / programmable software limit / current limit
- Positioning sensor: high resolution hall effect sensor
Price: £50.99
|
 |

2x1 DiSEqC Switch 2.0 for FTA Satellite Receiver Dish LNB

Click to enlarge |
2x1 satellite DiSEqC switch for 2 satellite dishes (LNBS) with 1 satellite receiver.
- Frequency Range: 900MHz~2400MHz
- Ports Type: All ports 75ohms F-Type Female
- Insertion Loss: 3dB
- Return Loss Ports: 8dB (TYP.)
- Ports Isolation: 28dB (TYP.)
- Control Signal: Position+Option
- Current Consumption: 20mA (Max.)
- Current to LNB: 500mA (Max.)
- Operation Temperature: -20oC~+65oC
Price: £3.5
|
 |

2x1 DiSEqC Switch 2.0 for FTA Satellite Receiver Dish LNB with Weather Cover

Click to enlarge |
2x1 satellite DiSEqC switch for 2 satellite dishes (LNBS) with one satellite receiver.
- Frequency Range: 900MHz~2400MHz
- Ports Type: All ports 75ohms F-Type Female
- Insertion Loss: 3dB
- Return Loss Ports: 8dB (TYP.)
- Ports Isolation: 28dB (TYP.)
- Control Signal: Position+Option
- Current Consumption: 20mA (Max.)
- Current to LNB: 500mA (Max.)
- Operation Temperature: -20oC~+65oC
Price: £4.0
|
 |

4x1 DiSEqC Switch

Click to enlarge |
Cheap 4x1 DiSEqC Switch for satellite receiver
- Frequency Range: 900MHz~2400MHz
- Ports Type: All ports 75ohms F-Type Female
- Insertion Loss: 3dB
- Return Loss Ports: 8dB (TYP.)
- Ports Isolation: 28dB (TYP.)
- Control Signal: Position+Option
- Current Consumption: 20mA (Max.)
- Current to LNB: 500mA (Max.)
- Operation Temperature: -20oC~+65oC
Price: £3.8
|
 |

4x1 DiSEqC Switch with Weather Cover

Click to enlarge |
Cheap 4x1 DiSEqC Switch for satellite receiver
- Frequency Range: 900MHz~2400MHz
- Ports Type: All ports 75ohms F-Type Female
- Insertion Loss: 3dB
- Return Loss Ports: 8dB (TYP.)
- Ports Isolation: 28dB (TYP.)
- Control Signal: Position+Option
- Current Consumption: 20mA (Max.)
- Current to LNB: 500mA (Max.)
- Operation Temperature: -20oC~+65oC
Price: £4.5
|
 |

8x1 DiSEqC Switch

Click to enlarge |
Cheap 8x1 DiSEqC Switch for satellite receiver
- 8x1 DiSEqC 1.1 switch
- Controled by DiSEqC1.1 uncom
- Commands and 13/18V
- Frequency 22kHz
- Plus DiSEqC 1.0 commands
Price: £8.8
|
 |

F type Coaxial Connector - Pair of F-Type Satellite or Cable Coaxial Connectors

Click to enlarge
|
Pair of F-Type Satellite or Cable Coaxial Connectors - use to join or extend Cables .
- AN ORIGINAL WARRANTIED CABLE MOUNTAIN CABLE CAN ONLY BE PURCHASED FROM CABLE MOUNTAIN
- Pair of Couplers with F-Type threads
- Use to Join or extend Coaxial Cables with F-Type Connections
- Can be chassis mounted using supplied washers
- Combine with other purchases from Cable Mountain for reduced postage
- Boxed-product Weight: 10 g
Price: £1.90
|
 |

F-Connector Screw - F-Connector Screw pack of 10

Click to enlarge
|
Pair of F-Type Satellite or Cable Coaxial Connectors - use to join or extend Cables .
- F-Connector Screw pack of 10
- High Quality
- Twist On DIY Type
- For use with 7mm Cable
- Boxed-product Weight: 300 g
Price: £1.83
|

1 Metre Gold Plated F-Type Male to Male Satellite Coaxial Cable by Cable Mountain

Click to enlarge
|
1 Metre F-Type Male to Male Satellite Coaxial Cable by Cable Mountain.
- F-Type Male Plugs suitable for Satellite & Most Cable Connections
- 24K Gold plated connectors
- Black RG59 75 ohm Cable with Pure Copper Conductors
- Combine with other purchases from Cable Mountain for reduced postage
- Boxed-product Weight: 59 g
Price: £3.20
|
 |

5 Metre Gold Plated F-Type Male to Male Satellite Coaxial Cable by Cable Mountain

Click to enlarge
|
5 Metre F-Type Male to Male Satellite Coaxial Cable by Cable Mountain.
- Only a purchase prom cable mountain will entitle you to the cable mountain 12 month guarentee
- 24K Gold Plated Connectors
- Black RG59 75 ohm Cable with Pure Copper Conductors
- F-Type Male Plugs suitable for Satellite & Most Cable Connections
- Combine with other purchases from Cable Mountain for reduced postage
- Boxed-product Weight: 300 g
Price: £4.80
|
 |

10 Metre Gold Plated F-Type Male to Male Satellite Coaxial Cable by Cable Mountain

Click to enlarge
|
5 Metre F-Type Male to Male Satellite Coaxial Cable by Cable Mountain.
- Only a purchase prom cable mountain will entitle you to the cable mountain 12 month guarentee
- 24K Gold Plated Connectors
- Black RG59 75 ohm Cable with Pure Copper Conductors
- F-Type Male Plugs suitable for Satellite & Most Cable Connections
- Combine with other purchases from Cable Mountain for reduced postage
- Boxed-product Weight: 477 g
Price: £7.50
|
 |

1.5M TV RF cable

Click to enlarge
|
1.5M TV RF cable.
- Name: High quality RF cable
- Length: 1.5M
- Terminal: RF head 90° +180°
- Packing: Blister
- Executive Standard: Q/XMSB006-2006
- Description:
- Product with a professional 75-5.75 ohm coaxial cable and 24K gold-plated casting
- Outside the wire with high quality imported PVC, ultra-low capacitance of the physical high foam PE, and high purity oxygen free copper (OFC) conductors
- High-quality shielding
- The configuration of two magnetic interference filters, enhanced anti-jamming capability, effectively improved the clarity of images
- Widely used in RF socket and flat screen TV, plasma, rear projection TV, high-end analog TV and digital TV RF signal connections.
Price: £3.00
|
 |

1.8M TV RF cable

Click to enlarge
|
1.8M TV RF cable.
- Name: High quality RF cable
- Length: 1.8M
- Terminal: RF head 90° +180°
- Packing: Blister
- Executive Standard: Q/XMSB006-2006
- Description:
- Product with a professional 75-5.75 ohm coaxial cable and 24K gold-plated casting
- Outside the wire with high quality imported PVC, ultra-low capacitance of the physical high foam PE, and high purity oxygen free copper (OFC) conductors
- High-quality shielding
- The configuration of two magnetic interference filters, enhanced anti-jamming capability, effectively improved the clarity of images
- Widely used in RF socket and flat screen TV, plasma, rear projection TV, high-end analog TV and digital TV RF signal connections.
Price: £3.50
|
 |

5M TV RF cable

Click to enlarge
|
5M TV RF cable.
- Name: High quality RF cable
- Length: 5M(OD8mmX1.0m)
- Terminal: RF head 90° +180°
- Packing: Blister
- Executive Standard: Q/XMSB006-2006
- Description:
- Product with a professional 75-5.75 ohm coaxial cable and 24K gold-plated casting
- Outside the wire with high quality imported PVC, ultra-low capacitance of the physical high foam PE, and high purity oxygen free copper (OFC) conductors
- High-quality shielding
- The configuration of two magnetic interference filters, enhanced anti-jamming capability, effectively improved the clarity of images
- Widely used in RF socket and flat screen TV, plasma, rear projection TV, high-end analog TV and digital TV RF signal connections.
Price: £10.50
|
 |

2.5'' Sata 120G Hard Drive with 5400rpm 8M Cache

Click to enlarge
|
2.5'' Sata 120G Hard Drive with 5400rpm 8M Cache.
- Brand: Hitachi
- Condition: Brand New
- Capacity: 120G
- Type: 2.5 inch
- Secondary cache: 8M
- RPM: 5400
Price: £28.99
|
 |

2.5'' Sata 120G Hard Drive with 7200rpm 16M Cache

Click to enlarge
|
2.5'' Sata 120G Hard Drive with 7200rpm 16M Cache.
- Brand: Hitachi
- Condition: Brand New
- Capacity: 120G
- Type: 2.5 inch
- Secondary cache: 16M
- RPM: 7200
Price: £39.99
|
 |

2.5'' Sata 160G Hard Drive with 5400rpm 8M Cache

Click to enlarge
|
2.5'' Sata 160G Hard Drive with 5400rpm 8M Cache.
- Brand:
Seagate
- Condition: Brand New
- Capacity: 160G
- Type: 2.5 inch
- Secondary cache: 8M
- RPM: 5400
Price: £32.65
|
 |

2.5'' Sata 160G Hard Drive with 7200rpm 16M Cache

Click to enlarge
|
2.5'' Sata 160G Hard Drive with 7200rpm 16M Cache.
- Brand: Hitachi
- Condition: Brand New
- Capacity: 160G
- Type: 2.5 inch
- Secondary cache: 16M
- RPM: 7200
Price: £41.50
|
 |

2.5'' Sata 250G Hard Drive with 5400rpm 8M Cache

Click to enlarge
|
2.5'' Sata 250G Hard Drive with 5400rpm 8M Cache.
- Brand: Hitachi
- Condition: Brand New
- Capacity: 250G
- Type: 2.5 inch
- Secondary cache: 8M
- RPM: 5400
Price: £37.50
|
 |

2.5'' Sata 250G Hard Drive with 7200rpm 16M Cache

Click to enlarge
|
2.5'' Sata 250G Hard Drive with 7200rpm 16M Cache.
- Brand: Hitachi
- Condition: Brand New
- Capacity: 250G
- Type: 2.5 inch
- Secondary cache: 16M
- RPM: 7200
Price: £62.50
|
 |